All designs,products and trademarks are the sole property of Precision Slot Cars™
 © Copyright 2007- 2021. All rights reserved
BUILT TO WIN!
Notice:We are making changes to our product lines.
 When changes are complete we will make all products available again. We appreciate all racers who use Precision Slot Car products!!


(586) 662-1149
<<<Please select the category
Displaying All products
Displaying products in category
Displaying search results for

1000 JK Cheetah

This new revised fixture is designed to build all JK including the C43 Aeolos and 4 1/2" C21 Cheetah 11 style chassis's C-11,
C-21,X25, X24, the .025 C-11.
Make sure your front wheels track straight,
You can be sure your entire chassis and axle's are parallel, perpendicular and square to the guide flag.
4) 1/8 x 1 stainless steel precision hardened dowel pins for the rear axle
5) 1/8 x 3/8 stainless steel dowel pins.
4) 1/16 x 3/4 stainless steel dowel pins.
1) 1/16 x 1/2 stainless steel dowel pin.
1) 10-32 Bolt, 10-32,Nut, #10 Washer
Measures 7 1/4" x 4" x 1/2" solid surface material

$44.95

1003 Mosetti Striker Defender

Mosetti Patriot, Striker, Defender and Avenger precision chassis fixture for flexi style chassis only.Sets your chassis and guide flag perpendicular to the rear axle. A must have for any serious racer. For 3/32" and 1/8" axles. Works without removing the pan. Included are 4, 1" stainless steel dowel pins for the axle, 9 steel dowel pins to hold chassis, 1 bolt, washer and nut. Measures 4" x 7 1/4" x 1/2" Solid material.

$44.95

1005 H&R chassis fixture

H&R chassis fixture holds all the parts in the adjustable wheel base chassis kit. Build your chassis square and perpendicular to the front and rear axle.Adjustable front and rear.

$45.95

1150 Generic jig

The best generic jig available! Made from PSC's exclusive extra hard .500 thick solid material. Three axle post size's 2MM, 3/32", 1/8" Jig Measures 4" x 7.25 x .500

$39.95

1400 FCR Chassis Fixture

FCR precision chassis fixture. Designed to hold the chassis and guide flag perpindicular to the front and rear axle. Posts for setting the front and rear axles in any bushing positions, This will provide improved handling. Works for both 4" and 4 1/2" FCR chassis. Measures 3 1/2" x 7 1/4" x 1/2" Corian.
Includes all stainless steel hardware.

$44.95

1401 1/8" FCR Set-Up Wheel Blocks

FCR set-up blocks. New design set-up blocks sets the clearance to .062. Select the tire size. With the blocks on the axle and the bushings in place, grind or file out the axle uprights until the chassis sits flat on your PSC chassis fixture. The clearance is set .010 higher than tire size so you can practice, break in the tires and still make tech.

$18.95

1510 Womp/Thumper fixture

Fixture designed for 1/32 scale Womp Womp/Thumper chassis's.Fits both womps and thumper. Made with solid surface material the fixture measrues 4" x 6" x 1/2" includes 8) 1/8" x 1" stainless steel dowel pins, 6) 1/8" x 1/2" stainless steel dowel pins 1) bolt, nut and washer.

$42.95

1511 Womp jig wheels

Jig wheels for 1/8 axle and .050 clearance.
womps/sprintcar

$18.95

1545 JDS Gasser chassis fixture

JDS Gasser chassis fixture,a totally different approach to chassis building. Main fixture body is machined square on all 6 sides.Side plates are CNC machined and dowel pinned for perfect alignment. All stainless steel hardware. Another high quality, innovative chassis fixture from Precision Racing.

$84.95

1602 WRP Pro Inline Motor Block

Machined perfectly square, drilled and tapped to use to hold all the pieces of the motor box.

$35.00

1652 Kentucky Trash motor block

Motor block fixture for Kentucky Trash. Holds all the box parts square.

$35.00

1753 ESR Pro sidewinder motor block

Motor block fixture for ESR Pro sidewinder chassis. Holds all the motor box parts for true,square assembly.LOW PRICE while supplies last

$20.00

1780 KC racing 2ss

KC racing designed chassis fixture.
CNC precision machined,CAD designed for accurate straight builds.
Recess in all the right areas for your no bar chassis build. Stainless steel hardware included.NOTE: MOTOR BLOCK NOT INCLUDED!

$59.95

1781 KCR 2ss motor block jig

KC racing designed motor block and axle height fixture block.
Use with the KCR 2ss chassis fixture.
held in place on fixture.
Sets axle height and holds motor box parts.

$39.95

1900 Chassis Tuner Tech Block

Chassis tuner tech block with wheel cut outs. Use to check if your chassis or guide got bent after that trip into the
wall. Mount bodies, change motors. Made of 1/2" Corian, measures 3 1/4" x 7 1/4"

$24.95

1920 1/8" Drag Race Set-Up Wheels

Set-up wheels for drag chassis. Wheels are exact size! Use to set your bodies for your drag chassis. Sets the axle perfectly horizontal. Use with the drag chassis fixture for outstanding performance and straight launches. All the popular size drag tires: 1 1/16", 1 3/16" , 1 5/16", 1.010. Made from 1/2" Corian.

$18.95

1921 3/32 Drag Race Set-up Wheels

Set-up wheels for drag chassis. Wheels are exact size! Use to set bodies on your drag chassis. Sets the axle perfectly horizontal. Use with the drag chassis fixture for outstanding performance and straight launches. All the popular size drag tires: 1 1/16", 1 3/16", 1 5/16", 1.010. Made from 1/2" Corian.

$18.95

1922 1/8 Drag wheels w/clearance

Drag race set up wheels with .062 clearance for 1/8 axle. Use to sctratch build drag chassis' Provides .062 chassis clearance while building your chassis flat.

$18.95

1923 3/32 Drag wheels w/ clearance

Drag race set up wheels with .062 clearance for 3/32 axle. Use to sctratch build drag chassis' Provides .062 chassis clearance while building your chassis flat.

$18.95

2000 3/32" RETRO Set-Up Wheel Blocks

3/32" axle retro class set-up blocks. .812 and .790 sets chassis clearance to .050. Select tire size, with blocks on axle and bushings in place. Grind out chassis uprights until chassis and blocks sit flat on your PSC chassis fixture. .750 and .625 set your front axle at .015 clearance.

$19.95

2100 1/8" .062 clear jig wheels

All NEW REDESIGNED Set-Up Wheel Blocks. Now for .062 , clearance. Select the size tires you are going to run. Sets the rear clearance at .062 If your car is sitting higher in the back than another racers car you are giving them an advantage. The lower to the track your car sits the better it will handle. Made from 1/2" solid material

$18.95

2101 3/32" .062 clear jig wheels

3/32 axle Set-Up Wheel Blocks for .062 , clearance. Select the size tires you are going to run. Sets the rear clearance at .062 If your car is sitting higher in the back than another racers car you are giving them an advantage. The lower to the track your car sits the better it will handle. Made from 1/2" solid material

$18.95

2102 3/32 axle .050 clear jig wheels

3/32 axle .050 track clearance Set-Up Wheel Blocks. Select the size tires you are going to run. Sets the rear clearance to .050 . If your car is sitting higher in the back than another racers car you are giving them an advantage. The lower to the track your car sits the better it will handle. Made from 1/2" solid material

$18.95

2103 1/8 jig wheels .050 clear

1/8 Jig Wheel Blocks .050 clearance. Select the size tires you are going to run. Sets the rear clearance at .050 . If your car is sitting higher in the back than another racers car you are giving them an advantage. The lower to the track your car sits the better it will handle. Made from solid material.

$18.95

2110 Rear Hard Body wheels

Designed for hardbody chassis'Rear.
1/8 Axle ,Four popular size tires
.050 clearance

$19.95

2112 Front Hardbody wheels

Designed for Hardbody chassis' Front.
3/32 axle Four popular size tires
.032 Clearance

$19.95

2900 Scratch Builder hardware set

Scratch Builder hardware set. Complete set of stainless steel pins (8) 1/8" diameter and (20) 1/16" diameter. (2) set screws (2) nuts (2) washers.

$14.95

3000 1/8" x 3 5/16" Build Axle

Ultra precision 1/8" axle. Special heat treat process that provides wear resistence. Axles are hardened all the way through Rockwell 60-63. Made of high quality American tool steel. Precision ground to a tolorance of +0.0000 -0.0002. A perfect addition to our chassis building fixtures.

$4.50

3001 3/32" x 3 5/16" Build Axles

Ultra precision 3/32" axle. Special heat treat process that provides wear resistence. Axles are hardened all the way through Rockwell 60-63. Made of high quality American tool steel. Precision ground to a tolorance of +0.0000 -0.0002. A perfect addition to our chassis building fixtures.

$4.50

3002 2mm x 3 5/16" Build Axle

Ultra precision 2mm axle. Special heat treat process that provides wear resistence. Axles are hardened all the way through Rockwell 60-63. Made of high quality American tool steel. Precision ground to a tolorance of +0.0000 -0.0002. A perfect addition to our chassis building fixtures.

$4.50

3003 Ultra Precision 1/8" x 10" Axle

Ultra precision 1/8" axle. Special heat treat process that provides wear resistence. Axles are hardened all the way through Rockwell 60-63. Made of high quality American tool steel. Precision ground to a tolorance of +0.0000 -0.0002 Available in 10" inch lengths. A perfect addition to our chassis building fixtures.

$9.95

3004 Ultra Precision 3/32" x 10" Axle

Ultra precision 3/32" axle. Special heat treat process that provides wear resistence. Axles are hardened all the way through Rockwell 60-63. Made of high quality American tool steel. Precision ground to a tolorance of +0.0000 -0.0002 Available in 10" inch lengths. A perfect addition to our chassis building fixtures.

$11.00

3005 Ultra precision 2MM x 10" Axle

Ultra precision 2mm axle. Special heat treat process that provides wear resistence. Axles are hardened all the way through Rockwell 60-63. Made of high quality American tool steel. Precision ground to a tolorance of +0.0000 -0.0002. A perfect addition to our chassis building fixtures.

$11.00

3006 Replacement 1/8" x 1/2 Stainless Steel Pins

Replacement dowel pins for our jig and fixtures. The same high quality dowel pins your jig and fixtures came with. Only available in Stainless Steel. 1/2" length. 5 pc lots.

$3.95

3007 Replacement 1/8' x 1" Stainless Steel Pins

Replacement dowel pins for our jigs and fixtures. The same high quality dowel pins your jig or fixture came with. Only available in stainless steel. 8 pc. lot

$5.65

3008 1/16 dia S.S. dowel pins

(12) Replacement 1/16" x 1/2" Stainless steel dowel pins.
replacements or additionals for all PSC scratch builders.

$4.95

3009 5" build axle

5" Ultra precision 3/32" build axle. Replacement build axle for Scratch builders,Mossetti builder,any extra wide fixtures or jigs. Axles are hardened all the way through Rockwell 60-63. Made of high quality American tool steel. Precision ground.

$6.95

3010 1/8 x 5 Build Axle

5 Inch Build Axle or cut to any length for drive axle

$6.95

3100 Custom Machined Router Bit

Carbide tipped Custom machined router bit for recessing wood tracks. Great for cleaning out old glue when rebraiding. Available size 3/4" all fit with a 1/8" precision hardened dowel pin, has a 1/4" shank to fit most routers.

$35.00

4000 Wing Car Jig

This is the new wing car fixture. Adjustable for all length wing car chassis even the new ultra short chassis. Included posts for jigging the rear axle bearing uprights.
Included with the fixture
4 1' x 1/8 stainless steel dowel pins
5 sets 4-40 x3/8 stainless steel screw,nut ,washer.
1 10-32 x 3/4 stainless steel bolt, washer, nut.

$74.95

Type in what your looking for>>>